Private hire vehicle conditions (wheelchair accessible)

  1. Policy statement
  2. Definition
  3. Type of vehicle
  4. Age criteria
  5. Approval of vehicle
  6. Grant of licence (New Vehicle Type)
  7. Passengers
  8. Signs and markings
  9. Licensing stickers and operator livery
  10. Communication equipment
  11. Vehicle maintenance
  12. Liquified petroleum gas (LPG)
  13. Fare meter
  14. Security cameras CCTV
  15. Driver partition
  16. Insurance
  17. Vehicle licence suspension
  18. Change of address
  19. Transfer of licence
  20. Failure to comply
  21. Vehicle licence surrender
  22. Return of licence plates
  23. Corporate/advertising on and inside of vehicles
  24. Explanatory notes and cautionary advice
  25. Cautionary advice

Policy statement 

Private Hire vehicles are licensed for the purpose of carrying the fare paying public on journeys pre-booked through a licensed Operator. The licensed vehicle must be safe and comfortable in every aspect of its design. 

Modern manufactured vehicles meet these requirements, but not all of them are suitable for the commercial carriage of a wide variety of passengers and luggage. Additionally, some vehicle designs are not appropriate for people who may suffer from a wide range of spinal, visual, ambulant or mobility disabilities. 

Pursuant to section 48 (1) (a) of the Local Government (Miscellaneous Provisions) Act 1976, when licensing a vehicle, the Council needs to ensure that a licensed vehicle must be safe, comfortable, suitable in type size and in every aspect of its design. 

Inside the vehicle the seat space must be adequate to accommodate passengers. All passengers expect to travel comfortably. 

Modern manufactured vehicles meet the safety requirements, but not all of them are suitable for licensing as private hire vehicles.

In simple terms, getting into and out of the vehicle must be as easy as possible and take into account the widest range of disabilities, as well as able bodied people. 

Inside the vehicle the seat space must be adequate to accommodate at least four passengers. Comfortable travelling is required by all passengers, but for people with some disabilities it is an absolute necessity. Accordingly, Leeds City Council will not ordinarily licence sports editions of vehicles or those vehicles designed for ‘off roading’ or having the characteristics of such a vehicle. 

It is not acceptable that public transport vehicles are adapted in any way to replicate sports vehicles with adjustments to the suspension, wheels, body fittings or exhaust or engine performance enhancements or the seating. 

Set out below are the pre-conditions to the consideration of the grant of a Private Hire vehicle licence. 

Additionally, once licensed, a Private Hire vehicle must continue to meet these conditions. 

Standard Pre-Conditions Attached to the Grant of a Private Hire Wheelchair Accessible Vehicle Licence 

1. At the point of licensing a vehicle must hold full ‘GB Whole Vehicle Type Approval’.

2. Will be a manufacturers’ standard right hand drive vehicle (excluding vehicles of London cab type) vehicles presented for first licence after June 2023 must meet one of the following vehicle categories.

  • Euro 5 Petrol (min 1400 cc)
  • Euro 6 Diesel (min 1400 cc)
  • Hybrid Petrol / Diesel 
  • Full Electric

3.The colour shall be a manufacturers’ single standard colour for the particular model. 

4. Fitted with a least four doors, two to the nearside and two to the offside.

5. Any vehicle to be licensed must have Category M1 (or equivalent) shown on the registration document (V5). Converted vehicles must have one of the following certificates - GB Type Approval / Individual Type Approval (IVA) / European low volume Type Approval or Certificates of conformity.  

6. Of at least the four-wheel type and carrying a suitable spare wheel or manufacturer repair kit which meets the legal requirements.

7.The vehicle must have four matching manufacturer’s recommended size wheels and tyres in a safe and serviceable condition. All tyres, including the spare (if supplied), must have at least 1.6mm tread depth at the time of inspection, we recommend maintaining your tyre depth at 2.0mm. All tyres must have the same speed rating and must not be aged more than 10 years. Remould tyres are not acceptable.

8. Maintained in the original form of the manufacturers specification, design or appearance of the vehicle. 

9. Vehicles which have been classified as Category N or S (D and C prior to 01/10/2017) will only be considered for licensing after the vehicle has been professionally repaired and undergone an MOT as well as an in-depth roadworthy vehicle / write off inspection and a report has been provided to the Council. The inspection and report should be completed by a suitably competent independent engineer assessor from a recognised Institute of the Motor Industry (IMI) organisation (such as AA or RAC) and or an independent vehicle inspection specialist who holds a Vehicle Damage Assessor (VDA) Automotive Technician Accreditation (ATA) qualification. 

10. Must be capable of being inspected to a MOT standard or an appropriate equivalent test to the satisfaction of the Council. 

11. The driver area and controls must be free from any obstruction.

12. No roof racks /bars or Tow Bars shall be affixed to the vehicle at any time, vehicles fitted with manufacturers roof rails are permitted.

14 All interior lighting must be fully operational and illuminate when the passengers doors open.

Conditions attached to a wheelchair accessible vehicle licence 

1. Definition 

1.1 For the purpose of these conditions a vehicle shall be deemed to be accessible to passengers who use a wheelchair if it is adapted or designed to carry at least one passenger who uses a reference wheelchair and travel seated in their wheelchair. Recent Government research (“2022 Access to taxis and private hire vehicles for disabled users” identifies that rear access for such users may often be easier and more comfortable and should be amongst the options encouraged).

Note: Vehicles with more than 8 passenger seats as detailed on the V5 registration document refer to Conditions Attached to the Grant of a Minibus Licence-appendix 19 applies 

2.0 Type of vehicle 

2.1. Vehicles will only be licensed if they satisfy the definition of a wheelchair accessible vehicle contained in paragraph 1 above and are of a vehicle type which has been approved in accordance with the procedure outlined in paragraph 4 below. 

Once so approved these vehicles will appear on the Councils’ Section 167 Approved List of vehicles for transporting passengers who use a wheelchair. 

Pursuant to section 48 (1) (a) of the Local Government (Miscellaneous Provisions) Act 1976, when licensing a vehicle, the Council needs to ensure that a licensed vehicle must be safe, comfortable, suitable in type size and in every aspect of its design. 

Inside the vehicle the seat space must be adequate to accommodate passengers. All passengers expect to travel comfortably. 

The seating capacity will be determined by the Licensing Authority and will be based upon the manufacturer’s specification as stated in the V5C document, the orientation of the seating and the dimensions of the seating. 

Modern manufactured vehicles meet the safety requirements, but not all of them are suitable for licensing as private hire vehicles.

2.2 Once a vehicle has been approved and a licence granted, it shall be maintained in that form and no change in the specification, design, condition or appearance of the vehicle shall be made for the duration of the licence without the prior written approval of the Council. 

2.3 Any vehicle to be licensed must have Category M1 (or equivalent) shown on the registration document (V5). Converted vehicles must have one of the following certificates - GB Type Approval / Individual Type Approval (IVA) / European low volume Type Approval or Certificates of conformity. 

2.4. Of at least the four-wheel type and carrying a suitable spare wheel or suitable tyre inflation kit.

2.4.1 All tyres, including the spare (if supplied), must have at least 1.6mm tread depth at the time of inspection, we recommend maintaining your tyre depth at 2.0mm. All tyres must have the same speed rating and must not be aged more than 10 years. Remould tyres are not acceptable.

2.5. Once licensed a vehicle must continue to comply with all of those preconditions to the grant of the licence contained within the policy statement. 

2.6. Of such capacity as to carry a minimum of four passengers, with provision for one passenger seated beside the driver, and three passengers occupying the rear seats, which shall provide a minimum width of 16 inches for each passenger. 

2.7. The law requires that front vehicle windscreens must permit a minimum of 75% light transmission and front passenger windows 70%. The Council will allow manufacturers standard tints on all other windows, excluding the front vehicle windscreen and the front passenger windows. This must only be the standard level of window tint. Blackout or privacy glass is not permitted all glass with less than 30% will be assessed on an individual bases, Self-applied material/film is not permitted.

2.7.1 Any licensed vehicle working on the Leeds City Council School Transport contract must have a minimum of 70% light transmission to all the rear windows.

2.8. Vehicles which have been classified as Category N or S (D and C prior to 01/10/2017) will only be considered for licensing after the vehicle has been professionally repaired and undergone an MOT as well as an in-depth roadworthy vehicle / write off inspection and a report has been provided to the Council.  The inspection and report should be completed by a suitably competent independent engineer assessor from a recognised motoring organisation (such as AA or RAC) or an independent vehicle inspection specialist who holds a Vehicle Damage Assessor (ATA or VDA) qualification.

2.9. Once a vehicle has been inspected and a licence granted, it shall be maintained in that form and condition including continued compliance with Condition 1(d) relative to accident damage. No change in the specification, design or appearance of the vehicle or addition of any body work accessories shall be made within the duration of the licence without the prior written approval of the Council. 

2.10. No roof racks /bars or Tow Bars shall be affixed to the vehicle at any time.

2.11. Fire Extinguisher 

Fire Extinguisher –Not mandatory, however, it is recommended and preferred that a fire extinguisher should be carried at all times in the vehicle. This fire extinguisher shall be a 1kg dry powder giving a minimum 5A/21B rating as defined in BSEN 3-4 British Standard for portable fire extinguishers. It must be mounted in its correct transport bracket within the boot area of the vehicle in a position that is easily accessible to potential users. All fire extinguishers should conform to British Standard EN3.3 

2.12. First Aid Kit

First Aid Kit –Not mandatory, however, it is recommended and preferred that the vehicle should carry at all times a fully equipped first aid kit which will contain suitable to treat 10 plus people, all stored in a suitably labelled container complete with transport bracket and fitted in a suitable prominent position within the boot area of the vehicle for ease.

2.13. All stored in a suitably labelled container complete with transport bracket and fitted in a suitable prominent position within the boot area of the vehicle for ease of use by the driver or passengers. In the case of many recent major incidents such kits have proved invaluable in saving lives.

3. Age criteria 

3.1. Vehicles being licensed for the first time The age of a vehicle, for licensing purposes, shall be determined by the date of first registration on the V5 document (log book). 

3.2. Vehicles that meet the emission requirements (electric, petrol hybrid or LPG) can be licensed under 10 years from the date of their first registration. These may also be licensed up to 15 years of age, following age extension inspections. Refer to Appendix 20 

3.2.1 Vehicles being licensed for the first time must be licensed for use within 28 days of the date of the new vehicle application inspection. 

3.3 Existing licensed vehicles seeking to be re-licensed 

A currently licensed vehicle may continue to be re-licensed for up to 15 years from the date of first registration providing that all other licensing requirements including any inspection relating to that vehicle have been complied with all vehicles aged 7 years and above will require an extended inspection yearly, and that the licence is renewed before the expiry of the current licence. 

Officers may consider additional licensing periods beyond 15 years, if deemed appropriate. Requests will be assessed on an individual bases, consideration will be given to the vehicle type, vehicle condition, inspection history and the vehicle will be subject to an inspection. Requests for consideration must be put in writing at least 12 weeks prior to the expiry of the current valid license. 

Any break in the licence will result in part (3.1) of this condition coming into effect. 

3.4 Inspection policy for licensed vehicles seeking to be relicensed beyond 7 years

A currently licensed vehicle may continue to be re-licensed beyond 7 years with an end date of 15 years from the date of first registration, for electric, petrol hybrid or LPG vehicles, providing that it is: - 

  • In suitable mechanical condition 
  • Safe 
  • Comfortable and meets all licensing conditions. 

This will be determined by a formal inspection by an Authorised Officer of the Taxi and Private Hire Licensing Section. It is the responsibility of the vehicle proprietor to ensure that vehicle inspection arrangements are in place prior to the expiry of the vehicle licence, allowing sufficient time for both the inspection and any remedial work to be completed prior to the expiry date. 

4. Approval of vehicle

4.1 For a vehicle to be approved as a wheelchair-accessible vehicle, it must be stage 2 converted have Category M1 (or equivalent) shown on the registration document (V5). Converted vehicles must have one of the following certificates - GB Type Approval / Individual Type Approval (IVA) / European low volume Type Approval or EC Certificates of conformity in the form it is to be licensed. The certificate(s) / approval documents must be provided to the Council with the licence application.

4.2 If the vehicle has a centre division onto which a passenger in a wheelchair or other passengers seats, seatbelts, seatbelt anchorage’s or the wheelchair lockdown system are to be attached, a document certifying that a separate static test has been satisfactorily carried out, must be provided at the time the application is submitted. 

4.3 If the vehicle is accessible from the rear with the passenger in the wheelchair facing forward whilst travelling, the system within the vehicle used to secure the passenger and the wheelchair must be approved. A document from a recognised vehicle conversion specialist certifying that this approval has been obtained must be provided at the time the application is submitted. The Council reserves the right not to accept such certification if they are not satisfied with the approving organisation.

4.4 Before the licence application is determined a copy will be sent by an Authorised Officer to the Leeds Hackney Carriage Joint Trade Council for their comments. Any comments received will be considered as part of the application. 

4.5 In addition to these approvals the vehicle must be adapted or designed to accommodate the following: 

4.6 Entry to the vehicle for Wheelchair Users 

4.7.1 At least one door on the vehicle must provide an aperture sufficiently large to load and unload a wheelchair and occupant 1200mm high and 750mm wide. (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.7.2 The area within the vehicle for the passenger travelling in the wheelchair must be adequate. This area should be a minimum width of 750mm (at mid height) by 1200mm long at floor level with a minimum of 1350mm from floor to roof lining overhead. (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.7.3 All wheelchair accessible vehicles must be fitted with either a ramp or lift to load and unload the wheelchair occupant. 

Requirements for Lifts (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.7.4 Lift platforms shall be: 

  • of sufficient size to accommodate an occupant in the reference wheelchair. 
  • The lift surface should be covered with non-slip material. 
  • Side edges of the lift platform shall be provided with flanges at least 25mm high to prevent the wheelchair rolling off. 
  • The rear edge shall incorporate a device at least 100mm high to prevent rolling off which becomes effective when the lift leaves the ground. 

4.7.5 The edges of the lift surface shall be marked in a high contrast colour scheme.

4.7.6 If power operated, the lift shall have a manual means of operation in the event of a power failure. 

Lifts complying with BS 6109 shall be considered to meet all the above criteria. 

4.7.7 Lifts must be stowed in a way which does not obstruct any handle or other opening device for any exit and such that in the event of an accident it could not cause injury to either passengers or the driver. If the lift obstructs an exit it must also be capable of being manually pushed or pulled out of the way from the inside and outside when the door is open so as to leave the doorway clear for use in an emergency. 

4.7.8 Any controls for the operation of a lift must be inhibited while the vehicle is in motion and may only be operated at the point where the boarding device is fitted either by the driver or by an individual under their supervision. 

4.7.9 The lift shall have a minimum safe working load of 300kg. 

4.7.10 Where a vehicle is fitted with a power operated lift, the proprietor of the vehicle shall produce to the Council’s vehicle inspector on each occasion that the vehicle is presented for testing by the Council, a valid test certificate for such lift in accordance with the requirements of the Lifting Operations and Lifting Regulations 1998 (LOLER). 

These regulations require that the passenger lifts are tested and certified as fit by a competent person every six months. 

Requirements for ramps (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.7.11 The ramp must provide a continuous surface at least 750mm wide and should not exceed 1900mm in length when deployed.

4.7.12 Channel ramps will not be approved on vehicles submitted for first time approval with the Council or after an existing licence has expired. 

4.7.13 The ramp surface should be covered with non-slip material. 

4.7.14 Side edges of the ramp shall be provided with flanges at least 25mm high to prevent the wheelchair rolling off. 

4.7.15 The edges of the ramp surface shall be marked in a high-contrast colour scheme.

4.7.16 The ramp shall have a minimum safe working load of 300kg. vehicles with less than 300kg will be assessed on an individual bases. 

4.7.17 When the ramp is deployed on to a flat, level road with the vehicle unladen but with a full tank of fuel and all other equipment normally carried, the slope must not exceed 1 in 3 (33.3% or 18.50˚) from the side loading area. Under those same conditions a rear facing ramp slope must not exceed 1 in 4 (25% or 14.1˚) If a vehicle is fitted with a “kneeling” suspension system, it may be operated to satisfy this requirement. 

14.7.18 When in use the ramp must be securely located at the point of wheelchair entry.

4.7.19 Ramps must be stowed in a way which does not obstruct any handle or other opening device for any exit and such that in the event of an accident it could not cause injury to either passengers or the driver. If the ramp obstructs an exit, it must also be capable of being manually pushed or pulled out of the way from the inside and outside when the door is open so as to leave the doorway clear for use in an emergency. 

4.8 General Entry and Exit Requirements (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.8.1 On all passenger doors the method of opening and direction of opening should be clearly marked on the inside and outside of the vehicle. 

4.8.1.1  Markings must be in a contrasting colour to the surrounding background and lettering should be at least 20mm high. 

4.8.2 Adequate illumination must be provided at night for the following areas when passengers are boarding and alighting: 

  • every entrance and exit step; 
  • the ground immediately outside any entrance or exit; 
  • the point in the vehicle where the fare is paid; and 
  • the passenger saloon. 

4.8.3 All passengers must have direct access to at least two doors one of which must be on the near side of the vehicle. Additional doors may be provided. 

4.8.4 It shall be possible for all passengers to reach at least two doors from their seats in reasonable comfort without having to move, displace or otherwise act upon any other seat or feature in the vehicle. 

This does not preclude the act of simply raising a seat facing a wheelchair passenger to assist in the manoeuvring of the wheelchair in the vehicle. 

4.8.4.1 In cases where there is no door adjacent to a particular row of seats, in order to reach an exit from any seat in that row, no passenger must have to pass through any gap narrower than one defined by the space required for the test cylinder described below. 

4.8.4.2 The minimum dimensions of the gap must be such that it is possible to pass a rigid cylindrical shape of diameter 420mm and length 1000mm, through that gap without any part of the flat face of that cylinder leaving the vehicle floor. 

4.8.4.3 Obscuring of rear lights The rear doors of a wheelchair accessible vehicle must so designed, so as not to any time obscure the rear light cluster either to the offside or near side when a wheelchair occupant is being loaded or unloaded.

Steps (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.8.5 If the vehicle’s interior floor is more than 250mm above the ground (with the vehicle empty except for a full tank of fuel), one or more steps maybe required. An assessment will be carried out by authorised officers and if required Leeds Accessibility Group may be called upon to assist in the decision making process. 

The height of the first step surface above the ground must not exceed 250mm (measured with the vehicle empty except for a full tank of fuel unless a kneeling suspension system is fitted). 

4.8.6 There must be no more than 3 steps into the vehicle. 

4.8.7 All steps must be permanently secured at the point of entry.

4.8.8 The vertical distance between the adjacent steps and between any final step and the interior floor of the vehicle must be between 120mm and 200mm. 

4.8.9 All steps must present a useable surface at last 400mm wide and 280mm deep. 

4.8.10 The surface of all steps must be slip resistant. Step nosing must be designed to minimise risk of tripping and must be in a contrasting tone and colour(s) to the step surface. 

4.8.11 No step, lift or ramp fitted to the side of a vehicle may project more than 100mm beyond the widest part of the vehicle (disregarding mirrors) when the vehicle is in motion. 

4.8.12 Any step (fixed or retractable) must be constructed and secured to the vehicle in such a way as to withstand, with no permanent deformation, the application of a weight at its centre of: 

  • 125kg, in the case of a step designed for one person and 
  • 250kg, in the case of a step designed to accommodate one person and one assistant. 

Documentary evidence will be required prior to licensing and must be available upon request from an authorised officer. 

Hand holds (each vehicle will be assessed by an authorised officer for this requirement)

4.8.13 A pair of handrails/handholds must be provided at the near side and offside passenger doors and must not impede access or egress. The surface of these should be of a slip resistant finish and must contrast in colour and tone with the surrounding area. 

4.8.14 There shall be a clearance of at least 35mm between the inside of the working part of the grab handle and the surface to which it is attached. 

4.8.15 The working section of the grab handle shall have a diameter (or major diameter in the case of a non-circular section) between 30 and 35mm. 

4.9 Wheelchair within the Vehicle (Ref: The Public Service Vehicle Accessibility Regulations 2000 and The Road Vehicles (Construction and Use) Regulations 1986)

4.9.1 It shall be possible to load a wheelchair occupant seated in the reference wheelchair and once in the vehicle, manoeuvre the chair into the prescribed position for travelling in safety and without lifting any of the wheelchair’s wheels from the floor. 

4.9.2 Occupied wheelchairs must only be transported either forward or rearward facing. 

4.9.3 The minimum headroom over the centre of the wheelchair space must be 1350mm. 

4.10 Securing the Wheelchair 

4.10.1 The wheelchair must be secured independently of the occupant regardless of its orientation within the vehicle. 

Requirements for tie-downs in the case of a rearward-facing wheelchair. (Ref: The Public Service Vehicle Accessibility Regulations 2000 and The Road Vehicles (Construction and Use) Regulations 1986)

4.10.1.1 The vehicle shall be fitted with a four point wheelchair tie down system situation symmetrically about the longitudinal centreline of the wheelchair space. 

4.10.1.2 A four tie down system shall, incorporate at least two attachment points on to the wheelchair for vehicles with a fixed bulkhead. The attachment points shall be approximately symmetrically arranged about the longitudinal centreline of the chair. 

4.10.1.3 The tie-down system must be able to withstand a force of 10kn applied horizontally towards the rear of the vehicle via a wheeled loading apparatus designed to represent the reference wheelchair (e.g. a surrogate wheelchair). The force shall be maintained for at least 0.2 seconds. The loading apparatus shall remain in place following the test. Documentary evidence of such testing will be required for licensing. 

4.10.1.4 Where an alternative wheelchair tie down system is fitted, the manufacturer shall provide such information as may be necessary to demonstrate that the system provides an equivalent level of protection to the requirements described above. 

4.10.1.5 Wheelchair tie-down equipment satisfying the requirements of ISO 10542 will be considered acceptable but the mounting points on the vehicle to which the tie-down(s) is/are attached must also be shown to meet the above requirements. 

Requirements for tie-downs in the case of a forward facing wheelchair. (Ref: The Public Service Vehicle Accessibility Regulations 2000 and The Road Vehicles (Construction and Use) Regulations 1986)

4.10.1.6 The vehicle shall be fitted with a four point wheelchair tie down system situated symmetrically about the longitudinal centreline of the wheelchair space. 

4.10.1.7 A tie-down system for a forward facing wheelchair must attach to at least four points on the wheelchair. The attachment points shall be approximately symmetrically arranged about the longitudinal centreline of the chair. 

4.10.1.8 Where different tie-down devices are used for the forward and rearward direction the attachment point to the vehicle must be so designed that it is not possible to attach the tiedown to the wrong anchorage point. This does not apply if the devices are permanently attached to the appropriate anchorage point or clearly labelled to indicate their suitability for a particular application. 

4.10.1.9 The tie-down system must be able to withstand a force of 22.2kn applied horizontally towards the front of the vehicle via a wheeled loading apparatus designed to represent the reference wheelchair (e.g., A surrogate wheelchair). The force shall be maintained for at least 0.2 seconds. The loading apparatus shall remain in place following the test. Documentary evidence of such testing will be required for licensing. 

4.10.1.10 The tie-down system must be able to withstand a force of 10.0kn applied horizontally towards the rear of the vehicle via a wheeled loading apparatus designed to represent the reference wheelchair (e.g. a surrogate wheelchair). The force shall be maintained for at least 0.2 seconds. The loading apparatus shall remain in place following the test. Documentary evidence of such testing will be required for licensing. 

4.10.1.11 Where an alternative wheelchair tie down system is fitted, the manufacturer shall provide such information as may be necessary to demonstrate that the system provides an equivalent level of protection to requirements described above. 

10.1.12 Wheelchair tie-down equipment satisfying the requirements of ISO 10542 will be considered acceptable but the mounting points on the vehicle to which the tie down(s) is/are attached must also be shown to meet the above requirements. 

4.11 Securing the Wheelchair Occupant (Ref: The Public Service Vehicle Accessibility Regulations 2000)  

4.11.1 The wheelchair occupant must be secured completely independently of the wheelchair. 

4.11.1.1 Requirements for occupant restraints in the case of a rearward facing wheelchair 

4.11.1.2 Any wheelchair occupant travelling rear facing should be afforded similar levels of protection to any other rear facing occupant in the same vehicle. 

4.11.1.3 As a minimum, a 3 point belt shall be provided for each wheelchair occupant. 

4.11.1.4 The anchorages for any rear facing wheelchair occupant restraint shall comply with the strength and positional requirements of Directive 76/115/EC (as amended) for a rear facing seat when tested using an apparatus designed to represent the reference wheelchair (e.g. a surrogate wheelchair). Documentary evidence of such testing will be required for licensing. 

Requirements for occupant restraints in the case of a forward facing wheelchair (Ref: The Public Service Vehicle Accessibility Regulations 2000)

4.11.1.5 Any wheelchair occupant travelling forward facing should be afforded similar levels of protection to any other forward facing occupant in the same vehicle. As a minimum, a three-point belt shall be provided for each wheelchair occupant. 

Provision should be made for the belt to be worn in contact with the wearers pelvis rather than the arms or other rigid parts of the wheelchair. 

4.11.1.6 The anchorage’s for any rear-facing wheelchair occupant restraint shall comply with the strength and positional requirements of Directive 76/115/EC (as amended) for a forward-facing seat. Documentary evidence will be required for licensing. 

4.11.1.7 Where there is a requirement for any equipment to meet at British Standard the product should be clearly marked to identify it as meeting that required standard. 

4.11.1.8 Where there is a compliance standard required by these Conditions on any equipment, evidence of conformity to that standard will be by way of original certification for that particular piece of equipment. Authentication of compliance must be proved by a recognised vehicle conversion specialist, suitable qualified technician or test centre.

4.11.1.9 Any proposed variation to the vehicle specification approved under this condition must be submitted to an Authorised Officer for approval. If the variation is suitable, written approval will be given before the vehicle is included on the approved vehicle list.  

4.12 Luggage space 

4.12.1 A compartment or area must be provided to adequately accommodate passenger luggage.

4.12.2 This may be an area behind the rearmost seat and or the front seat passenger area, any luggage stored must be stored securely in a way that it does not cause harm or injury to any passenger and or interfere with the drivers ability to drive safely and remain in control of the vehicle at all times.

5.0 Grant of licence (New Vehicle Type)

5.1 Once approval has been given for the grant of a licence, the vehicle shall be presented for licensing within six months subject to any delays which are outside the Applicant’s control. Any delay together with the reasons for it shall be notified to the Taxi and Private Hire Licensing Section in writing as soon as possible. 

6. Passengers

Licensing authorities are responsible for deciding how many passengers a taxi or private hire vehicle is licensed to carry. Whilst the Vehicle Registration Certificate (V5C) issued by the Driver and Vehicle Licensing Agency states the seating capacity of a vehicle, licensing authorities are entitled to restrict the passenger carrying capacity in the interest of safety, comfort and convenience.

The following conditions will be enforced by the Council in respect of the transportation of passengers in licensed vehicles: 

Each person transported in the vehicle regardless of age will be regarded as a separate passenger, the number of passengers must not exceed the total number of passengers the vehicle is licensed to transport.

Each child under the age of three will be included when reckoning how many passengers may be transported. If travelling in the front seat of the vehicle children can legally sit in the front passenger seat from the age of 12 or when they are 135cm tall, whichever comes first. Until then, they must be secured in an appropriate child restraint (car seat or booster seat). Even when they can legally sit in the front, it's generally safer for children to remain in the back for as long as possible.

Children under 3 must use a child restraint in the rear if available; if not, they can travel unrestrained however we recommend that the rear lap belt section of the seatbelt is used. Children aged 3 to 12 must use an adult seat belt in the rear if a child seat isn't provided. Drivers are responsible for ensuring children are properly restrained. 

Guidance on an appropriate restraint can be found in the DTLR guide "Seat Belts and Child Restraints". 

The seating capacity will be determined by the Licensing Authority and will be based upon the manufacturer’s specification as stated in the V5C document, the orientation of the seating, the dimensions of the seating, passenger safety and comfort. 

7.0 Signs and markings

This licensing authority must ensure that the travelling public are aware of the type of vehicle they are using. It is important for the safety of the public that they are aware that they are entering a licensed vehicle. Some members of the public do not distinguish between a hackney carriage and a private hire vehicle and do not realise that Private hire vehicles are not available for immediate hire and must not be hailed in the street.

7.1 Private Hire Vehicles Shall not be of such design and appearance as to lead any person to believe that the vehicle is a hackney carriage.

7.2 Private Hire vehicles must be painted all one colour EXCEPT for those vehicles which display a corporate livery, which must comply with the provisions set out in section 23.0 of these conditions

7.3 No Smoking signs- a minimum of 2 no smoking signs must be displayed at all times, these must be on a white background and visible from outside the vehicle.

7.4 The International Wheelchair sign measuring 160mm x 160mm and featuring a white symbol on a blue background. This must be displayed in the rear and side windows so as to be clearly visible.

7.5 No signs, notices, advertisements, plates, marks, numbers, letters, figures, symbols, emblems or devices whatsoever shall be displayed on, in or from the vehicle except as may be required by any statutory provision of these conditions.

8.0 Licensing stickers and operator livery 

(1) All vehicles will be required to have a licence plate permanently affixed to the rear external bodywork, near and offside front doors (magnetic back plates are not permitted), windscreen ‘visor style’ signs to the front and rear windscreens are optional. Each licensed Private Hire vehicle shall have no signs or markings on it except those identified below. 

(2) An identification disc will be issued by Leeds City Council, which must be fixed to the inside, of the windscreen in such a manner as to be capable of being easily read from the roadside and by passengers within the vehicle. 

(a) Rear Licence Plate

Leeds City Council will issue to each licensed vehicle a ‘licence plate’ to be fitted by the Council and wherever possible to the off side rear of the vehicle. It will display the licence number, vehicle registration number and the number of passengers it is licensed to carry. It will be displayed at all times and maintained in good condition. (magnetic back plates are not permitted).

There must be a flat surface area on the rear of the vehicle for the rear license plate to be affixed to, where there is no flat surface the owner must prefix a mounting plate 120mm wide X 300mm long for the license plate to be fixed to. 

(b) Door Licensing Stickers

(i) Two license information stickers in a format prescribed by the Council, will be fitted to the licensed vehicle, one to the driver door and another to the front passenger door. These plates will be produced to a specification set by the Council. They will be fitted by the Council and secured to the vehicle by an appropriate adhesive chosen by the Council. The mounting of the licence or information plates onto a magnetic back plate is not permitted. The removal of the licence door plate other than when effecting bodywork repair, or when the vehicle is de-licensed should be carried out by an Authorised Officer. 

(C) Operator Livery

(ii) The name of the licensed Operator from which the vehicle receives bookings maybe shown on the rear doors in the manner approved by the Council. The Operator name must be in contrasting colours to the background with a colour scheme that is easy for all to distinguish the name. The Operator name must feature predominately across the space provided. An appropriate company logo may be incorporated into the detail of the plate but not at the expense of reducing the letter sizing significantly or making the name more difficult to read. 

(ii) The Operator name must be professionally prepared (not individual letters) and have night light reflective qualities, equivalent to that of the Council produced licence plate and door livery plate. Alternatively, the letters may be stencilled and utilise the reflective materials of the Council’s plate. 

(iii) Prior to affixing any such details to the vehicle, its design and quality must be approved in writing by an Authorised Officer. 

A copy of the Operators approved artwork will be retained by the Council for reference purposes to future conformity. 

Changes to any feature of the approved design or material must be notified in writing to the Council and approved by an Authorised Officer before being taken into use. 

(3) Visor Strip are OPTIONAL (a) Two non illuminated windscreen visor signs, as approved by the Council, which should be seventy five millimetres (three inches) in depth, may be fitted to the top of the front and rear windows and across the entire length of the window (nominally.) They should be visible from the outside and in contrasting colours. The name of the company should be to the centre of the sign with the base station telephone number at either side of it. 

(b) Prior to affixing any such details to the vehicle, its design must be approved in writing by an Authorised Officer. The visor strip must be a professionally produced strip (not individual letters.) The visor strip should be fitted to the inside of the vehicle. Where there is manufacturers tinted glass strip to the top of the windscreen, the Proprietors visor strip may be fitted to the exterior, but in accordance with MOT testing regulations, it should not interfere with the sweep area of the windscreen wipers. An Authorised Officer may approve a variation to the specified size, where appropriate, in writing. 

(c) The exception to the rear signs being placed at the top would be where there is a high-level brake light or a permanently fixed car aerial. In that case they may be taken to the lowest visible point of the rear window. 

(d) Where there are split rear doors, the base telephone number will appear in one rear window and the Operator in the next window. They must be placed to minimise obstruction to the rear view mirror. The conformity to the split-window signs is otherwise the same in every other respect. 

(e) Where the information displayed by requirements of these Conditions ceases to be correct the signs must be immediately removed and replaced with the correct information. 

For further information on corporate advertising on vehicles, refer to section 22.0.

9. Communication equipment 

Communication equipment may be fitted in the vehicle to provide sufficient means by which any person in a Private Hire base station may communicate with the driver. 

No licensed proprietor shall use any communication equipment other than equipment approved by the Department of Trade and Industry (DTI) under the provisions of the Wireless Telegraphy Act 1949. This licence shall be produced for inspection if required by an Authorised Officer or Police Constable. 

10. Vehicle maintenance 

The Council encourages proprietors to maintain their vehicles to a good standard throughout the life of their licence, proprietors should demonstrate that they have invested in the maintenance of their vehicle over a period of time in order to achieve the standards set out within this policy. 

(a) Every vehicle shall be maintained in a safe and clean condition at all times and is subject to such examinations as are required by the Council. 

(b) Seats should still be fully ‘sprung’, free of stains, tears, cigarette burns or repair, and not threadbare. Floor coverings must be secure and should not be unduly worn and present no trip hazards. Household carpeting or similar is unacceptable. Upholstery (headlining and side panel coverings) should be free of ingrained grime, fractures and maintained in the manufacturers original style. 

(c) All floor mats / coverings must be secure and free from holes or tears.

(d) Luggage and storage areas must be kept as free space for passenger’s luggage. 

(e) The driver of a licensed Private Hire Vehicle shall, at the request of an Authorised Officer of the Council or a Police Constable, stop the vehicle, whether or not passengers are being carried, to enable it to be checked for compliance with all the Conditions of the vehicle, driver and Operator licences granted by the Council and relevant legislation, and shall not proceed until the Authorised Officer or Constable has given approval. 

(f) Accident damage must be reported to the Council, in writing, within 72 hours, by the Proprietor and must be repaired without undue delay. Bodywork should be maintained to a good condition, paintwork should be sound and well maintained and free of corrosion, inferior re-spray paintwork and ‘cover up’ temporary repairs.

The policy is based on the consideration that licensed vehicles are providing a public transport service and as such standards of safety are essential and the vehicle should be in good condition for its use and mileage. The appearance of the vehicle, externally and internally, and the level of comfort and cleanliness it offers can adversely impact upon the image of the city of Leeds if the vehicle is shabby. It is also important that licensed vehicles have an acceptable emissions level, the Council will encourage proprietors to aim for this standard so that the travelling public will benefit from the standards of safety and comfort being maintained. 

11. Liquified petroleum gas (LPG) 

Vehicles with manufactures or ‘aftermarket’ Liquid Petroleum Gas (LPG) systems must be tested, certified and recognised by Liquid Gas UK, a valid insurance and current V5 acknowledging the LPG conversion must be provided. 

For new vehicle licence applications, all certifications and documents must be produced at the time of application. For vehicles that are wanting to install an LPG system during the currency of a vehicle licence, they must inform the Taxi and Private Hire Licensing Section in writing and produce the above certification and book the vehicle in for an inspection within 7 days of installation. 

LPG conversions fitted to petrol Hybrid vehicle will not be accepted unless fitted as standard by the vehicle manufacturer. 

12. Fare meter

A licensed Private Hire vehicle may be equipped with an approved fare meter. If so, a certificate of calibration must be provided at the time of the meter seal, this must be dated no later than 72 hours prior to the sealing of the meter. The taximeter must be sealed by an authorised person of the council. 

13. Security cameras CCTV

The main issues in respect of a safety camera fitted to a vehicle are set out below: - 

(a) Will be of a make, type and design previously approved by Authorised Officers of the Council and on the ‘Approved List’ maintained by the Taxi and Private Hire Licensing Section. 

(b) Will not be changed in any way from its original design, be free of damage and maintained in working condition. 

(c) The vehicle will carry appropriate signs, approved by Authorised Officers, informing the public that camera surveillance is active in the vehicle. 

(d) The recording system and memory card (or other image memory recording system) will be securely stored within the vehicle and away from public access. 

(e) Installation and maintenance must be in accordance with manufacturer’s specifications and recommendations. 

(f) The images contained in the recording device may only be downloaded by an Authorised Officer of the Council or Police Officer. 

(g) Dash cams are only permitted to face outwards at the road ahead, any rear dash cams MUST be mounted in the rear window area facing outwards only. All dash cams must NOT have the audio recording function active at any time. 

Further guidance and policy document can be found on our webpages and on the Information Commissioners Office (ISO) website surveillance in vehicles. 

14. Driver partition 

15.1 Any wheelchair accessible vehicle shall be so designed and constructed as to contain a partition separating the rear facing passenger the driver from any passenger(s) travelling in the vehicle. Where the passengers are forward facing there will be no requirement to fit a partition. Where such a partition is fitted as a preference by the proprietor. It will confirm to the technical specification set out in this Condition. 

15.2 The partition shall incorporate a means of communication with the driver and a means by which a fare may be paid without leaving the vehicle. 

15.3 The partition shall extend the full width and height of the vehicle interior at the point where it is fitted. 

15.4 The upper portion of the partition may be glazed, but without tint and, in any event, must allow the occupants of the rear seats to see the fare display at all times. 

15.5 If the partition is of glass, it will as a minimum standard comply with BS5857, BS5282, BSAV178. The only other permitted glazing material is polycarbonate. 

15.6 The purpose of the partition is to provide a reasonable degree of privacy for the passengers and a reasonable degree of protection from attack for the driver. 

15. Insurance

(a) At all times during the duration of this licence there shall be in force in relation to the use of the vehicle as a Hackney Carriage / Private Hire Vehicle, a Policy of Insurance or such security as complies with the requirements of Part VI of the Road Traffic Act 1988. 

(b) The Proprietor or the driver of the licensed vehicle shall produce a current Certificate of Insurance or Cover Note showing: 

i) That there is in force in relation to the use of the Hackney Carriage or Private Hire Vehicle to which the application relates a policy of insurance or such security as complies with the requirements of Part VI of the Road Traffic Act 1988 and have a current vehicle excise licence. The Certificate of Insurance or Cover Note must clearly state the driver(s) and the vehicle. 

ii) In the case of a vehicle covered by a block insurance policy, the Certificate or Cover Note must be produced showing that there is in force in relation to the use of the Hackney Carriage or Private Hire Vehicle to which the application for the grant of licence relates, a policy of insurance of such security as complies with the requirements of Part VI of the Road Traffic Act 1988. The Certificate of Insurance or Cover Note must clearly state the driver(s) and vehicle or. 

iii) When the driver and vehicle is not so stated then a V5 Registration Document will be required which relates to the vehicle owner/keeper being the same as the proposer of the insurance and the proprietor of the licence. 

(c) For the duration of the licence the original certificate of insurance or cover note or a one-touch electronic summary document must be carried in the vehicle. The documentation must be available for inspection by an Authorised Officer or Police Constable at all reasonable times.

(d) The proposer of the insurance produced must be the proprietor of the licensed vehicle. 

(e) When a vehicle is leased or hired, the driver may not be listed as the registered keeper on the V5C document. In these circumstances, the vehicle may still be insured for use as a licensed vehicle, provided that:

  1. The registered keeper (proprietor) gives written consent, and
  2. The named licensed driver(s) who will be operating the vehicle are included on the insurance policy.

(f) The proprietor of the vehicle does not need to be insured to drive the vehicle, as long as they have given written authorisation for the licensed driver(s) to insure and use the vehicle for licensed purposes.

(g) The original insurance documentation will be produced to the Council, when requested, the Proprietor must also produce separate correspondence from the insurer to enable the Council to reduce the risk of fraudulent documents being produced. 

(h) At all times during the currency of the vehicle licence, the proprietor of the vehicle must hold in the vehicle the original Certificate of Insurance or Cover Note relating to that vehicle and which shows those persons entitled to drive the vehicle or a Certificate which complies with 2(c) as above. 

The documentation must be available for inspection by any Authorised Officer of the Council or Police Officer at all reasonable times. 

Failure to hold or produce this documentation will, except in exceptional circumstances, lead to the consideration of the suspension or revocation of the licence. 

16. Vehicle licence suspension 

(a) Any licensed vehicle stopped for a roadside check or routine inspection which is found to be defective will be issued with a suspension and rectification notice suspending the vehicles licence. 

17. Change of address 

The proprietor shall notify the Council in writing on the prescribed form of any change of his address during the period of the licence within 72 hours of such change taking place. 

18. Transfer of licence 

If the proprietor of a licensed Private Hire Vehicle transfers his interest or part interest in the vehicle to any other person, he shall be required to notify the Council in writing, on the prescribed form, and within fourteen days of such transfer, specifying the name and address of the person to whom such interest has been transferred along with the other necessary detail to enable the Council to monitor the licence. Failure to notify the Council may result in prosecution and immediate suspension of the vehicle licence.

19. Failure to comply

Failure to comply with any of these conditions may lead to action under the Council’s Vehicle off Road / Vehicle Rectification system or may lead to your licence being suspended or revoked. 

20. Vehicle licence surrender

If the proprietor surrenders a vehicle licence, then that licence shall be treated as if it had expired on the date of surrender and cannot thereafter be re-instated.

21. Return of licence plates

(a) The plates and disc issued to a licensed Private Hire Vehicle remain the property of Leeds City Council and must be returned to the Council on expiry of the Private Hire Vehicle Licence.

(b) Failure to return plates and disc within seven days of being instructed to do so in writing will render the proprietor liable to prosecution.

22.0 Corporate/advertising on and inside of vehicles

Corporate /Advertising on both the inside and outside of a vehicle will be considered. All advertising will be subject to Licensing Authority approval and must adhere to Advertising Standards Association (ASA) and British Codes of Advertising and Sales Promotion.

All requests to advertise must be made in writing and include a copy of the proposed advertisement to the Licensing Authority and permission given prior to any such advertisement being used / applied to the licensed vehicle. Applications for advertising are available at the licensing office. 

Digital advertising will only be considered on the inside of the rear passenger compartment and must not interfere with the front driver and or passenger area.

Once approval has been given the livery must be professionally prepared, clearly legible and properly maintained at all times. One vehicle licence plate pre-printed by the Council with the phrase “Private Hire Vehicle Licence” bearing the vehicle licence number and registration number, must be fitted to the rear external bodywork of the vehicle. This plate must be fitted by the Council and once done so, should not be removed except upon expiry of the vehicle licence. 

At the conclusion of the agreement the vehicle livery shall immediately be restored to the livery approved by the Council the vehicle must be presented for inspection at the Licensing Office with the advertising material removed. If the agreement is subject to a follow on or extension to the current agreement or a new advertising agreement period is being negotiated full details of this agreement / negotiation must be provided to the council for consideration. Once received the council will agree a time period for the agreement to be put in place. Failure to notify the council of this may result in the advertising having to be removed and the vehicle being restored and council livery being reinstated. 

23.1 Once approval has been given the livery must be professionally prepared, clearly legible and properly maintained. 

23.2 At the conclusion of the agreement the vehicle livery shall immediately be restored to the livery approved by the Council the vehicle must be presented for inspection at the Licensing Office with the advertising material removed.

23.3 Licensed vehicles which are accessible by passengers who use a wheelchair and carry corporate advertising which has been approved by the Council MUST exhibit or display: 

23.4 One vehicle licence plate pre-printed by the Council with the phrase “Licensed Taxi” bearing the vehicle licence number and registration number, must be fitted to the rear external bodywork of the vehicle. Private hire vehicles may need to display vehicle licence numbers and advance bookings only on the front doors. These plates must be fitted by the Council and once done so, should not be removed except upon expiry of the vehicle licence. 

23.5 The International Wheelchair sign measuring 160mm x 160mm and featuring a white symbol on a blue background. This must be displayed in the rear and side windows so as to be clearly visible. 

23.6 The vehicle may also display the identification disc and windscreen signs as specified in paragraphs 8.3.2 and 8.3.3 of the conditions attached to a hackney carriage proprietor’s licence. 

23.7 Licensed vehicles which are accessible by passengers who use a wheelchair and carry corporate advertising which has been approved by the Council MUST exhibit or display: 

23.8A vehicle licence plate pre-printed by the Council bearing the vehicle licence number, registration number and number of passengers, must be fitted to the rear external of the vehicle.

23.9 The advertising MUST incorporate Two door license plates bearing the phrase “Advanced Bookings Only” bearing the vehicle licence number and number of passengers.

23.10 The International Wheelchair sign measuring 160mm x 160mm and featuring a white symbol on a blue background. This must be displayed in the rear and side windows so as to be clearly visible. 

23 Explanatory notes and cautionary advice

Health and safety of passengers (duty of care) 

Most people will be aware that employers have a duty of care to their employees, but the Health and Safety at Work Act, 1974, goes further. Part 1, Section 3 (2) states “it shall be the duty of every self-employed person to conduct his undertaking in such a way as to ensure, so far as is reasonably practicable, that he and other persons (not being his employees) who may be affected thereby are not exposed to risks to their health and safety”. Operators, drivers and Proprietors are advised that a failure to safeguard passengers could have serious implications for the licence holder, and the licence.

24. Cautionary advice

You are strongly advised not to purchase a vehicle or any equipment or fittings, without first reading the Council’s polices and conditions to the grant of a licence and also these Conditions. If in doubt about any aspect you should make an appointment with a Vehicle Examiner at the Licensing office.

Licensing administration staff are not qualified to make technical assessments and are under instruction not to offer such advice. If a vehicle does not meet the conditions and or you do not have the required documentation as required in these conditions, it is unlikely that a licence will be granted.

Drivers considering buying a vehicle, whether previously licensed or not, are Strongly advised to conduct a HPI check prior to purchase. The Council offers a ‘Hire Purchase information’ service to enable licensed drivers who are considering purchasing a vehicle to ascertain a vehicle’s HPI status. It is recommended you seek advice from the Council’s Vehicle Examiners prior to purchase.

Points of reference have been made using the following:

  • The Road Vehicles (Construction and Use) Regulations 1986
  • The Public Service Vehicles Accessibility Regulations 2000 
  • Local Government (Miscellaneous Provisions) Act 1976
  • The Road Vehicles (Approval) Regulations 2020
  • DFT Guidance for manufacturers and operators 2005
  • DFT Best Practise Guidance 2023